-
- Posts: 1
- Joined: Wed Jun 23, 2021 12:57 pm
We are using a smaller diameter column, flow cell, etc. on our new ICS-6000, but we are struggling to get the Chromeleon 7.3 software to actually integrate the peaks of our lower standards (including one level which was easily detected on our 13 year old IC-3000.) The peaks are very noisy until the top end of our curve. We had one single day of running where all the peaks were smooth and all the lower standards were integrated, but since that day all of the area counts have been around half of the value of that one good day. Does anyone have any suggestions of what might be going on or how we can get back to the area counts that we had on the nice curve?