oil spill out in Foreline pump of GCMS

Discussions about GC-MS, LC-MS, LC-FTIR, and other "coupled" analytical techniques.

3 posts Page 1 of 1
This morning plenty of oil is found on the pan. does this indicate pump leaking?
Unless it was recently filled with too much then yes.

Is the level lower than normal?

You can mark the level with tape or a marker and then observe and see if it drops more, just don't let it go below the lower limit.

You can also clean the pan and place paper towels under the pump and see where the drops fall more easily to help find where the pump is leaking.
The past is there to guide us into the future, not to dwell in.
I've found that some pumps do leak a little. If more than a few mls I would consider swapping it out.
3 posts Page 1 of 1

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 1117 on Mon Jan 31, 2022 2:50 pm

Users browsing this forum: No registered users and 1 guest

Latest Blog Posts from Separation Science

Separation Science offers free learning from the experts covering methods, applications, webinars, eSeminars, videos, tutorials for users of liquid chromatography, gas chromatography, mass spectrometry, sample preparation and related analytical techniques.

Subscribe to our eNewsletter with daily, weekly or monthly updates: Food & Beverage, Environmental, (Bio)Pharmaceutical, Bioclinical, Liquid Chromatography, Gas Chromatography and Mass Spectrometry.

Liquid Chromatography

Gas Chromatography

Mass Spectrometry