Page 1 of 1

Finnigan mat lcq restoring

Posted: Thu Jul 28, 2016 12:19 pm
by adrianomol
Dear friends,

I'm Adriano , from Italy and I have in the lab an old and unused for years, mass spectrometer Finnigan Mat lcq. It should be the model depicted in this picture http://i.ebayimg.com/images/a/(KGrHqZ,! ... s-l500.jpg
I have the pc, same age and it works fine, also it is able to connect to the mass, but...well, I don't have the softwere to control it, and I'm looking for it. It seems that not all version of Xcalibur works, but only the oldest, it should be 1.2 version but I'm not sure. I've the version 1.3 for lcq advantage and it give back an error of wrong software version. Indeed in the xcalibur configuration there is not the possibility to choose the finnigan mat lcq MS. So I'd really appreciate if someone could help me in this restoration mission and give me the software, sale it, make a copy, any solution will be appreciated.
best regards,
Adriano

Re: Finnigan mat lcq restoring

Posted: Sun Jul 31, 2016 4:09 pm
by leadazide
Hi,

I believe I have the software but will not be able to verify for about a week or two due to personal time off.. I will also be able to support trying to reestablish functionality of the MS.. Either slowly and painfully with messaging back and forth or if at all possible via a remote session..

If I don't get back within two weeks post again as I most likely forgot..

Re: Finnigan mat lcq restoring

Posted: Mon Aug 08, 2016 5:52 pm
by leadazide
Hi,

I have looked through my stash and found an LCQ 1.3 which should work for this system.. The LCQ advatage is a different version of MS and therefore the error when running this version..

The drivers are about 8 Mb... How your you like them?

Re: Finnigan mat lcq restoring

Posted: Mon Aug 08, 2016 5:52 pm
by leadazide
Hi,

I have looked through my stash and found an LCQ 1.3 which should work for this system.. The LCQ advatage is a different version of MS and therefore the error when running this version..

The drivers are about 8 Mb... How would you like them?

Re: Finnigan mat lcq restoring

Posted: Tue Feb 05, 2019 2:25 am
by cosmo
Heya @leadazide, do you still have those drivers? I'm finding it impossible to find them anywhere.

Re: Finnigan mat lcq restoring

Posted: Thu Feb 07, 2019 4:09 am
by piracetam
I have an LCQ Advantage, and Xcalibur 1.3. The hardware architecture is different than the LCQ Classic (MAT), but similar to the LCQ Duo. Xcalibur 1.2 probably has the required drivers.