-
- Posts: 6
- Joined: Wed Jul 17, 2013 7:33 pm
Hi
I have a problem with my GC-MS. It is an old Saturn Varian 2100 T model. During calibration there is a problem with the carrier gas flow. The column flow is OK but the total flow can’t be keep at constant level and vary from 15 ml/min to 50 ml/min.
Can anyone tell me what I should do?
I have a problem with my GC-MS. It is an old Saturn Varian 2100 T model. During calibration there is a problem with the carrier gas flow. The column flow is OK but the total flow can’t be keep at constant level and vary from 15 ml/min to 50 ml/min.
Can anyone tell me what I should do?
