-
- Posts: 1
- Joined: Tue Jul 13, 2021 8:46 pm
Running 524.2 with EST Analytical's Evolution and Centurion with success for the past two years. Their instruments are connected to an Agilent GCMS. Wanted to see if folks have been able to resolve leaks originating from the water bottle feeding the autosampler.
I’m having difficulties with a leak at the water bottle cap on a Centurion autosampler. The leak detector is showing that its coming from the cap/O-ring. I’ve tried reseating the cap/o-ring many times and I inspected the o-ring (it shows no signs of wear and tear). I ensured the brass fittings that hold the water lines are tight and I’m making sure to not overtighten the cap, but still can’t plug the leak. Any ideas for resolving this?
-Jim