Dear all,

we have a Varian CP-3800 GC with three detectors: an ECD, a FID and a PFPD. We have an injector for the ECD and another 1041 on-column injector that we use with different columns for the PFPD, or alternatively, the FID.
For the PFPD we used a CP-SilicaPLOT 30 m x 0,53 mm x 6 um, that Agilent referred that this column is on hold. The suggested alternative was the GasPRO 0.32 mm. But, is this compatible with our type of injector? Is there another alternative?

Thank you for all the help you can give.