Getting the peak width from Xcalibur Quan

Discussions about GC and other "gas phase" separation techniques.

2 posts Page 1 of 1
I am working on Thermo GC-FID in which Xcalibur and Quan Browser are installed.
Is there anyway to let the software calculate peak width?

Also, can I export the row data to Originlab?
Obviously these features are buried inside feature-rich and user-friendly XCalibur interface.

As one of the UniChrom authors I would do the following:
1. File / Open ... - Select in format list "Thermo raw file (*.raw)" (2 clicks)
2. Integrate required peaks (either manually or automatically) (3 clicks)
3. Double click on peak contour (2 clicks)
4. Select in peak properties the page "Chromatographic" - (1 click)
5. Get at peak width at any desired height (5%,20% ....). (1 click)
6. Get in thoughts - why I need Origin there?
2 posts Page 1 of 1

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 1117 on Mon Jan 31, 2022 2:50 pm

Users browsing this forum: No registered users and 1 guest

Latest Blog Posts from Separation Science

Separation Science offers free learning from the experts covering methods, applications, webinars, eSeminars, videos, tutorials for users of liquid chromatography, gas chromatography, mass spectrometry, sample preparation and related analytical techniques.

Subscribe to our eNewsletter with daily, weekly or monthly updates: Food & Beverage, Environmental, (Bio)Pharmaceutical, Bioclinical, Liquid Chromatography, Gas Chromatography and Mass Spectrometry.

Liquid Chromatography

Gas Chromatography

Mass Spectrometry