-
- Posts: 2
- Joined: Tue Jul 24, 2018 12:56 pm
FID GC: Agilent 6850
Software: Chemstation Rev B.04.02
Capillary column: 30 m x 0.25 mm x 0.25 um
Carrier gas: Hydrogen
FID gas: Helium
I am in the process of creating a new method based on a method meant for a 10 m x 0.10 mm x 0.10 um column and using Helium as a carrier gas. As stated above, I have a 30 m x 0.25 mm x 0.25 um column and I use hydrogen as a carrier gas. I have already used Agilent's method transfer program to convert/translate the majority of the method parameters. However, there is no place in the method transfer program to translate the split inlet ratio/ split flow/ total flow.
I know nothing about creating a method. Is there a formula or calculation I can use to figure out what my split inlet ratio or split flow should be?
Thank you so much for any insight!