Best column to detect both CO and CO2 from a mixture.

Discussions about GC and other "gas phase" separation techniques.

2 posts Page 1 of 1
I need to analyze CO, CH4, and CO2 in a mixture but my technician says I can detect CH4 and CO2 in porapak and CO and CH4 in MolSieve but I want to detect all three simultaneously. Could anybody suggest a workable column for this need?
I used to run 3C Fixed Gases/ASTM1946 for Hydrogen/Helium, Oxygen, Nitrogen, CO, CH4, and CO2 on a GS-GasPro column. The temperature ramp was from -80C to 80C, with CO2 eluting around 7.5 minutes if memory serves.
2 posts Page 1 of 1

Who is online

In total there are 2 users online :: 1 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 234 on Tue Feb 06, 2018 7:33 am

Users browsing this forum: Majestic-12 [Bot] and 1 guest