Hi gals
I've got 2 used Gc's with no computer.
One is Perkin Elmer Autosystem and another is Perkin Elmer Autosystem XL. Both should be made around 1996.
Gc's start up and work fine with keypad. Both have integral Link 680 installed on them with GPIB and RS-232 ports on left side panel.
Now I want to connect them to PC. I've Totalchrom workstation version 6.3.2 and APK for autosysem installed.
when I connect Gc's by GPIB, ( Agilent PCI card), IOLIB detects GC on GPIB port.
Problem is that I can not configure GC in Totalchrom. Not by GPIB nor by Rs-232 cable, Totalchrom wont connect to port.
When I try TC Configuration Editor, after hitting "Query port for type", it says:"Failed to connect to acquire server".
Ive tried it on several computers, but no luck. every time I got stuck in this stage.( both GC's have same result).
by the way, my serial cable is : 1-1 2-3 3-2 7-7. But, I could not connect through RS-232 either.
Now, I'm looking to hear from anybody have experience with Link 600, or Integral Link 680 and these Gc's configuration.
any help and idea is greatly appreciated.
bahram