Problem communication after replacing logic board on GC 7890

Discussions about GC and other "gas phase" separation techniques.

2 posts Page 1 of 1
Hi all,
I recently undertook repairs on a GC-TCD,
namely the replacement of several cards, including the logic card.
After that, I encounter a communication problem between the GC and the PC.
What should be done in this situation? Is there a specific protocol to adopt or follow in this case?
Thank you in advance for your precious return,
Kind regards
The first thing I would check is if the IP address on the GC and what is listed on the Data System are the same. With the new boards it could have been set to a different value.
The past is there to guide us into the future, not to dwell in.
2 posts Page 1 of 1

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 1117 on Mon Jan 31, 2022 2:50 pm

Users browsing this forum: No registered users and 1 guest

Latest Blog Posts from Separation Science

Separation Science offers free learning from the experts covering methods, applications, webinars, eSeminars, videos, tutorials for users of liquid chromatography, gas chromatography, mass spectrometry, sample preparation and related analytical techniques.

Subscribe to our eNewsletter with daily, weekly or monthly updates: Food & Beverage, Environmental, (Bio)Pharmaceutical, Bioclinical, Liquid Chromatography, Gas Chromatography and Mass Spectrometry.

Liquid Chromatography

Gas Chromatography

Mass Spectrometry