-
- Posts: 18
- Joined: Sun Feb 07, 2021 7:20 pm
- Location: UK
I’m trying to configure our Perkin Elmer HPLC to connect an existing Absorbance Detector.
We have a Perkin Elmer 200 Series HPLC system with a PE Nelson 600 Series Link/NCI900 system interface for communications.
I recently found an old Absorbance Detector that originally came bundled with the HPLC, but it hasn’t been connected since we got it.
I believe that it physically connects to either Signal 1 or 2 in the back of the NCI 900 unit via a 3.5mm jack.
The problem that I have is that I cannot find a way to configure the TotalChrom software to network with the Absorbance Detector.
Any ideas on how I can do this, please let me know.
Thanks.